USB to Serial RS-232 DB9 FTDI Mini Adapter with Extension Cable
MFG Part Number: 765288
- Adds one RS-232 serial port by connecting to a USB port
- High speed serial port with the baud rate up to 921.6K bps
- Serial port protected with surge protection of 10KV
- Installed as a standard Windows COM port
- OS Compatibility: Windows 7,8 & Windows 10 as well as Linux and Mac OS 10.X
CompatibilityLinux OSX 10 Windows 10 Windows 8 Windows 7 Windows Vista Windows XP
USB 2.0 Serial Adapter with Built in Drivers for XP and 2003 and New Windows Vista!. Ultra Compact Mini USB 2.0 Serial RS-232 Adapter cable for NoteBook and Laptop Users. Mini Adapter has one Status LED and uses FTDI Chip for up to 230K Speed. Converts a USB port into a 9-pin male RS-232 serial port capable of speeds up to 230,400 bps.
This USB Serial FTDI-based adapter converts a USB port into a serial port capable of speeds up to 921,600 bps.
Designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB COM 765288 instantly adds a serial communication port to your system. By taking advantage of the USB bus, this product makes it easier than ever to add serial ports and serial devices to your system with easy plug-and-play and hot plug features. Plugging the USB COM 765288 into the USB port, the adapter is automatically detected. There are no IRQ & COM port conflicts since the port doesn't require any additional IRQ, DMA, or memory as resources on the system.
The 765288 provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a high speed serial communications port.
Features & Specifications:
- Easy plug-and-play installation
- Installed as a standard COM port
- Full modem control signals & data signals supported
- Serial port speed up to 921,600 bps
- 384 byte receive / 128 byte transmit buffering.
- Serial Adapter Dimensions: 2.63x1.37x.61in (LxWxH)
Linux, OpenBSD and FreeBSD support the adapters directly, so no driver is necessary.
- Power/RX/TX LED's Built-In, easy installation using provided Widows Drivers by FTDIchip.com
- Detachable Cable Standard A to A Extension cable Lenght up to 15ft.(2ft cable provided)
- The USB Serial Adapter is designed to make serial port expansion quick and simple.
- Installed as a standard Windows COM ports, Full RS-232 modem control signals, RS-232 data signals; TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND
- USB Extension cable of 2 feet included
- Powered by USB port
The USB Serial Adapter provides instant connectivity with modems, ISDN TAs, PDS, handheld & pocket PCs, digital cameras, POS, serial printers, etc. It is suitable for remote access, retail and industrial applications, data collection and other applications requiring a High speed and or LOW serial communications port.
Changing the COM Port Number With the release of V1.02.07, FTDI has introduced a properties sheet which allows the user to change the COM port number of a USB serial port. From DeviceManager, select "View devices by type", then "Ports (COM & LPT)". Select the USB serial port and click Properties. Select the "Port Settings" tab, then click Advanced. Choose the required COM port number from the list and click OK. Notes If a modem is attached to the USB serial port when the port number is changed, it will continue to work under the new port number. If a modem had been attached to the USB serial port but was not attached when the port number was changed, it will not work when re-attached under the new port number. In this case, the modem must be removed from the system and re-installed. In general, if there are devices in the system which have been attached previously to the USB serial port, they may not work after the port number has been changed. If this is true, remove the device from the system and re-install it.
Works with Serial Watt Viewer
Works with serial watt viewer! Watts view compliant recommend works great you can't beat the price either! Ill buy again when i need one!
Works fine with OSX
I've tested it so far with Mac OS X 10.6 and 10.4.11, using the current driver from FTDI's chip site. Works just fine with my micro-controllers using ZTerm. I have additional plans for it, and am confident it will work as well with those. Heck of a deal at this price!
Works flawlessly on my fuel tuning module and older GPS. Love it. I originally purchased one with a different chipset and it did not work on anything, this one works on em all.
works with serial watt veiwer!
works with serial watt viewer! watts view compliantrecommend works great you cant beat the price either!ill buy again when i need one!
Exactly What I Needed for Legacy DB9 RS-232 Interfaces
I do software development on a lot of embedded systems ranging from tiny PIC and AVR MCU based device to big ARM and PowerPC MPU based systems. Some of the older systems export the processor logic-level serial port out through a DB9 connector with RS232 signal levels. This little gadget is inexpensive enough that I buy one and just screw it onto the board, more or less permanently converting the board to a USB-serial interface. The gadget is barely bigger than a bare DB9 connector hood. And since it uses an FDTI chip inside, it works flawlessly. (I've given up using any USB-serial adapter that doesn't use a chip from FTDI because the rest are all crap.) So now when faced with an older DB9 RS232 port, I just automatically order one of these from Amazon.com and eliminate that little detail from my worry list.
Works for my need
Worked for the application I needed it to. AVR STK500 with windows 7 64-bit. Arrived in decent amount of time. fairly compact
Dirt cheap, works great.
No problems with OS/X, Linux, or Windows. Used with Windows in a VM, and Wine within OS/X to flash embedded devices. Good stuff. The FTDI stuff always is.
This device just works. Plugged it in to my Windows 7 x64 notebook and within 10 seconds it was ready to use on Com 3. It then allowed me to set it to Com port 1, which makes it a bit easier to use it with some applications. In short, good product for my needs.
Works as advertised
I plugged it in to a Windows XP 32-bit machine, Windows took a few minutes to search the internet for a driver, installed the driver and presto it worked! Only used it 2x so far, but those 2x it worked perfectly.
Workls flawlessley on my fuel tuning module and older gps. Love it. I originally purchased one with a different chipset and it did not work on anything, this one works on em all.
Works fine with OSX
I've tested it so far with Mac OS X 10.6 and 10.4.11, using the current driver from FTDI's ftdichip site. Works just fine with my microcontrollers using ZTerm. I have additional plans for it, and am confident it will work as well with those. Heck of a deal at this price!